When you invest in a quality awning for your 4WD, you want it to be ready when adventure calls - but you don’t necessarily want it permanently attached to your vehicle.
That’s where RacksBrax + Outback Tourer come together.
RacksBrax quick release awning hitches provide a practical way to make the Outback Tourer awnings easier to remove and reinstall, giving you the flexibility to change your vehicle from everyday driver to fully equipped touring rig without spending hours undoing the brackets and nuts and bolts.
Your Outback Tourer Awning. Your Way.
An Outback Tourer awning is designed for life outdoors, providing shade and shelter when you’re travelling, camping or exploring.
But your 4WD doesn’t necessarily need to carry that heavy awning every day.
Perhaps you’re heading into a low-clearance car park. Maybe you’re using the vehicle for the daily commute. Or perhaps you’re simply finished with your camping trip and want to store your expensive awning safely at home.
With a compatible RacksBrax quick release system, removing the awning becomes quick and straightforward.
No tools. No repeated unbolting. No unnecessary hassle.
Fast On. Fast Off.
The whole idea behind RacksBrax is simple: leave the brackets on the vehicle and make the awning itself quick to remove.
Once the RacksBrax quick release awning system is correctly installed, the Outback Tourer awning can be released without repeatedly undoing anything.
That means your awning can stay on the vehicle when you’re touring, but come off quickly when you’re not.
It’s a particularly useful solution for 4WD owners who use the same vehicle for both adventure and everyday driving.
Look After Your Investment
A quality awning is an investment.
Leaving it permanently mounted means exposing it to more sun, rain, dust, road grime and harsh weather - even when you’re not actually using it.
Removing your Outback Tourer awning after a trip gives you the opportunity to clean it, dry it properly and store it somewhere protected.
That’s especially important after wet-weather camping. An awning should be allowed to dry thoroughly before being packed away to help prevent mould and mildew.
TAKE IT OFF.
DRY IT.
STORE IT.
PROTECT IT.
Then put it back on when you’re ready for the next trip.
Precision Engineering
RacksBrax isn’t simply about convenience.
Its quick release hitch systems have been developed around engineering standards and principles including load paths, mounting geometry, material selection and defined load ratings.
The RacksBrax HD and XD Hitch ranges are engineered by Australian mechanical engineers using finite element analysis and physical load testing to validate specified loading.
The hitch components are manufactured from UV-stabilised glass-reinforced nylon, meaning the hitch body itself cannot rust, while stainless-steel hardware and mounting components provide additional corrosion resistance.
It’s an engineered approach to a simple problem.
The Right Hitch for Your Outback Tourer Awning
Compatibility depends on the specific Outback Tourer awning model, its mounting-point spacing and the required number of support points.
That’s why it’s important to check your particular awning configuration before purchasing.
HD Hitch
Designed for compatible pull-out awnings.
XD Hitch
Engineered for larger wing-style awnings.
If you’re unsure which configuration is right for your Outback Tourer awning, check the RacksBrax compatibility information or contact the RacksBrax team.
Ready for the Next Adventure
Your Outback Tourer awning should spend its time doing what it was designed for - providing shade and shelter while you’re camping.
It doesn’t need to spend the rest of the week deteriorating in the sun while sitting on your roof.
With RacksBrax, you can make your Outback Tourer awning fast on for adventure and fast off for everyday driving and storage.
-
✓ Less hassle.
-
✓ Less unnecessary exposure to the elements.
-
✓ No tools.
-
✓ No rust; and a precision-engineered quick release system designed around the demands of 4WD touring.
RacksBrax + Outback Tourer - a smarter way to lock-on, remove and look after your awning.
Outback Tourer Awnings | RacksBrax Quick Release
When you invest in a quality awning for your 4WD, you want it to be ready when adventure calls - but you don’t necessarily want it permanently attached to your vehicle.
That’s where RacksBrax + Outback Tourer come together.
RacksBrax quick release awning hitches provide a practical way to make the Outback Tourer awnings easier to remove and reinstall, giving you the flexibility to change your vehicle from everyday driver to fully equipped touring rig without spending hours undoing the brackets and nuts and bolts.
Your Outback Tourer Awning. Your Way.
An Outback Tourer awning is designed for life outdoors, providing shade and shelter when you’re travelling, camping or exploring.
But your 4WD doesn’t necessarily need to carry that heavy awning every day.
Perhaps you’re heading into a low-clearance car park. Maybe you’re using the vehicle for the daily commute. Or perhaps you’re simply finished with your camping trip and want to store your expensive awning safely at home.
With a compatible RacksBrax quick release system, removing the awning becomes quick and straightforward.
No tools. No repeated unbolting. No unnecessary hassle.
Fast On. Fast Off.
The whole idea behind RacksBrax is simple: leave the brackets on the vehicle and make the awning itself quick to remove.
Once the RacksBrax quick release awning system is correctly installed, the Outback Tourer awning can be released without repeatedly undoing anything.
That means your awning can stay on the vehicle when you’re touring, but come off quickly when you’re not.
It’s a particularly useful solution for 4WD owners who use the same vehicle for both adventure and everyday driving.
Look After Your Investment
A quality awning is an investment.
Leaving it permanently mounted means exposing it to more sun, rain, dust, road grime and harsh weather - even when you’re not actually using it.
Removing your Outback Tourer awning after a trip gives you the opportunity to clean it, dry it properly and store it somewhere protected.
That’s especially important after wet-weather camping. An awning should be allowed to dry thoroughly before being packed away to help prevent mould and mildew.
Then put it back on when you’re ready for the next trip.
Precision Engineering
RacksBrax isn’t simply about convenience.
Its quick release hitch systems have been developed around engineering standards and principles including load paths, mounting geometry, material selection and defined load ratings.
The RacksBrax HD and XD Hitch ranges are engineered by Australian mechanical engineers using finite element analysis and physical load testing to validate specified loading.
The hitch components are manufactured from UV-stabilised glass-reinforced nylon, meaning the hitch body itself cannot rust, while stainless-steel hardware and mounting components provide additional corrosion resistance.
It’s an engineered approach to a simple problem.
The Right Hitch for Your Outback Tourer Awning
Compatibility depends on the specific Outback Tourer awning model, its mounting-point spacing and the required number of support points.
That’s why it’s important to check your particular awning configuration before purchasing.
HD Hitch
Designed for compatible pull-out awnings.
XD Hitch
Engineered for larger wing-style awnings.
If you’re unsure which configuration is right for your Outback Tourer awning, check the RacksBrax compatibility information or contact the RacksBrax team.
Ready for the Next Adventure
Your Outback Tourer awning should spend its time doing what it was designed for - providing shade and shelter while you’re camping.
It doesn’t need to spend the rest of the week deteriorating in the sun while sitting on your roof.
With RacksBrax, you can make your Outback Tourer awning fast on for adventure and fast off for everyday driving and storage.
RacksBrax + Outback Tourer - a smarter way to lock-on, remove and look after your awning.
Not sure which quick release awning hitch fits your awning brand?
Tell us what awning you've got and we'll do the rest →Have questions? Contact us at sales@racksbrax.com