If you’re running the Eezi-Awn wing-style awning, you already know the value of having quality gear when you’re out camping and touring. But when the trip is over, do you really want that expensive awning permanently attached to your 4WD?
Looking after your camping gear is looking after your investment in good gear.
With RacksBrax, Eezi-Awn awnings can be converted to a RacksBrax quick-release system, making them fast to remove when they’re not required. The important detail is that Eezi-Awn awnings with mounting channels at 80 mm centres require the RacksBrax HD Awning Adaptor Plate. The adaptor plate is an essential part of the installation.
Eezi-Awn + HD Hitch + Adaptor Plate
RacksBrax engineers have developed the HD Awning Adaptor Plate specifically to bridge the gap between the Eezi-Awn’s 80 mm mounting channels and the RacksBrax HD Hitch.
The adaptor effectively acts as the connection between the awning and the RacksBrax HD Hitch, allowing the Eezi-Awn wing awning to use the RacksBrax quick-release system. The HD Adaptor Plate is designed for compatible awnings with spine spacings from 80–105 mm and is available in double and triple configurations.
This is an important distinction when selecting your RacksBrax system: if your Eezi-Awn awning has 80 mm mounting centres, you need the HD Hitch and the appropriate HD Awning Adaptor Plate.
Why Use RacksBrax?
Once installed, the RacksBrax system allows your Eezi-Awn awning to be removed without repeatedly undoing nuts and bolts.
That means you can take the awning off when you’re not camping, reducing unnecessary exposure to UV, rain and road grime. Once removed, you can clean and dry the awning properly before storing it - helping protect your investment between trips. RacksBrax also offers HD Wall Mounts for convenient storage.
And there’s no need to worry about the hitch body rusting. RacksBrax HD Hitch components are manufactured from UV-stabilised glass-reinforced nylon, so the hitch body itself cannot rust.
No Tools. No Rust. Precision Engineering.
The RacksBrax HD Hitch is rated at 20 kg per load point, with the number of hitches required determined by the awning manufacturer’s recommended support points and the applicable roof-rack and vehicle load limits.
The result is a smarter way to run your Eezi-Awn:
Eezi-Awn awning + HD Awning Adaptor Plate + RacksBrax HD Hitch
Fast on for adventure. Fast off when you’re finished. No tools. No rust on the hitch body.
RacksBrax + Eezi-Awn: Quick Release Made Easy
If you’re running the Eezi-Awn wing-style awning, you already know the value of having quality gear when you’re out camping and touring. But when the trip is over, do you really want that expensive awning permanently attached to your 4WD?
Looking after your camping gear is looking after your investment in good gear.
With RacksBrax, Eezi-Awn awnings can be converted to a RacksBrax quick-release system, making them fast to remove when they’re not required. The important detail is that Eezi-Awn awnings with mounting channels at 80 mm centres require the RacksBrax HD Awning Adaptor Plate. The adaptor plate is an essential part of the installation.
Eezi-Awn + HD Hitch + Adaptor Plate
RacksBrax engineers have developed the HD Awning Adaptor Plate specifically to bridge the gap between the Eezi-Awn’s 80 mm mounting channels and the RacksBrax HD Hitch.
The adaptor effectively acts as the connection between the awning and the RacksBrax HD Hitch, allowing the Eezi-Awn wing awning to use the RacksBrax quick-release system. The HD Adaptor Plate is designed for compatible awnings with spine spacings from 80–105 mm and is available in double and triple configurations.
This is an important distinction when selecting your RacksBrax system: if your Eezi-Awn awning has 80 mm mounting centres, you need the HD Hitch and the appropriate HD Awning Adaptor Plate.
Why Use RacksBrax?
Once installed, the RacksBrax system allows your Eezi-Awn awning to be removed without repeatedly undoing nuts and bolts.
That means you can take the awning off when you’re not camping, reducing unnecessary exposure to UV, rain and road grime. Once removed, you can clean and dry the awning properly before storing it - helping protect your investment between trips. RacksBrax also offers HD Wall Mounts for convenient storage.
And there’s no need to worry about the hitch body rusting. RacksBrax HD Hitch components are manufactured from UV-stabilised glass-reinforced nylon, so the hitch body itself cannot rust.
No Tools. No Rust. Precision Engineering.
The RacksBrax HD Hitch is rated at 20 kg per load point, with the number of hitches required determined by the awning manufacturer’s recommended support points and the applicable roof-rack and vehicle load limits.
The result is a smarter way to run your Eezi-Awn:
Fast on for adventure. Fast off when you’re finished. No tools. No rust on the hitch body.
Not sure which quick release awning hitch fits your awning brand?
Tell us what awning you've got and we'll do the rest →Have questions? Contact us at sales@racksbrax.com